For most Philadelphia homeowners, no: L&I does not require a permit to replace windows or doors in a one- or two-family home, as long as the new unit goes into the same opening with no change in size, shape or location and no structural work. That changes if the property is historic, if you enlarge, shrink, move or add an opening, or if the building is larger than a two-family. Here is what the City, the state and the EPA actually publish.
Philadelphia Window and Door Permits at a Glance
| Situation | L&I permit? |
|---|---|
| Same-size replacement, one- or two-family home, not historic, no structural change | Usually no |
| Same-size replacement, larger residential or commercial building | Yes, often an EZ permit |
| Opening made bigger, smaller or moved, or a new opening cut | Yes, not eligible for EZ |
| Property on the Philadelphia Register of Historic Places | Yes, after Historical Commission approval |
| Work that modifies a party wall | Yes, with Protection of Property documents |
When Philadelphia L&I Requires a Permit
L&I’s Get a Building Permit page lists “replacing doors and windows in one-or-two-family dwellings” among projects that often don’t need a permit, provided the property isn’t on the historic register. The City’s EZ standard for windows and doors is more precise: no permit is required to replace non-fire-resistance-rated windows or doors without structural change on one- and two-family dwellings, with no change in the location, shape or size of the existing openings.
Go beyond a straight swap and you need a permit. That includes widening a rear opening for a bigger slider, cutting a new window or door, making an opening smaller, reframing around an opening, and any replacement on a historic property. For a full Building Permit on an alteration to a one- or two-family dwelling, L&I lists a review time of 15 business days and a $25 filing fee that is credited toward the final permit fee. Unsure whether your plan is structural? Check with L&I before ordering.
EZ Permits: Permits Without Plans
An EZ permit is L&I’s route for simple projects that don’t need drawings, including same-size exterior window and door replacement. Since one- and two-family homes usually need no permit for this, EZ window and door permits mostly apply to larger buildings. Conditions include:
- Same location and same size as the original opening; no new openings.
- The opening must be at least 30 feet from any interior lot line, which rules out many openings in attached buildings.
- Buildings with more than 40% vertical fenestration on above-grade walls, and buildings listed as historic, don’t qualify.
- Facade alterations in listed areas, such as the Chestnut and Walnut Street area and the Powelton Village conservation overlay, need City Planning Commission approval.
The standard also requires the gap between the unit and the framing to be sealed with an air barrier material, a maximum U-factor of 0.32, and safety glazing in hazardous locations such as glass in and beside doors, which matters for patio doors and sidelites. If you’re comparing products, as in our Andersen window series comparison, ask for each unit’s rated U-factor. L&I says most applications without plans are processed within five business days, and window and door permits can be issued immediately when a contractor with a current license, insurance and tax account applies.
Applying Through eCLIPSE
Permits are filed online through eCLIPSE or in person, by appointment, at the Permit and License Center at 1401 John F. Kennedy Blvd., under the property’s legal address from the Office of Property Assessment (OPA). The permit isn’t issued until the contractor is identified and confirms their involvement. Inspections are requested through eCLIPSE or at (215) 255-4040, and L&I issues a Certificate of Approval once they pass.
Who Pulls the Permit: Contractor or Homeowner?
Any property owner or authorized agent, such as a contractor or licensed expediter, can apply. Who may do the work is a separate rule: a licensed Philadelphia contractor, except on an existing one- or two-family home that doesn’t need an electrical or plumbing permit. There, the work can also be done by an owner who lives in the building, or by a registered PA Home Improvement Contractor who holds a Philadelphia Commercial Activity License. Whoever applies, put it in writing before work starts: whether a permit is needed and who is getting it.
Historic Properties: Historical Commission Approval Comes First
If your house is on the Philadelphia Register of Historic Places, individually or within a historic district, the no-permit exemption doesn’t apply. The Historical Commission requires a project review for installing, repairing, removing or replacing windows, storm windows, doors, storm doors, security doors, garage doors and shutters. Replacing clear window glass counts as maintenance and needs no review.
L&I will refuse a permit application for a historic property without Historical Commission approval. The review is free and can be done through eCLIPSE. Staff approve many applications directly; others may be referred to a public hearing. The Commission’s stated goal is protecting public views. To check whether your property is designated, use your official OPA address on the register, the Commission’s map or its list of historic districts, or email preservation@phila.gov.
Rowhome Issues: Facades, Party Walls and Original Openings
Front facade. Some blocks have facade controls or a Neighborhood Conservation Overlay even when the house isn’t historic, and L&I lists City Planning Commission review as a pre-approval where zoning requires it. Resizing front openings on such a block? Check with L&I.
Original openings. The City’s Philadelphia Rowhouse Manual advises: “When replacing doors and windows, don’t reduce the size of the original openings.” Shrinking an opening also means you need a permit.
Party walls. L&I requires Protection of Property documentation, including a pre-construction survey, a monitoring plan and an adjacent owner acknowledgement, for party wall modifications and for severing structural roof or wall covering that spans properties. A same-size swap doesn’t touch it; widening or reframing next to it may.
Egress and Fire-Escape Windows
A bedroom window may be the required emergency escape opening, and in older multi-unit buildings a window may lead to a fire escape. Philadelphia’s public permit pages don’t spell out how replacements there are treated, so check with L&I before ordering if a new window would shrink the clear opening, raise the sill or swap an operable sash for a fixed one. One rule the City does publish: the Rowhouse Manual says bars or gates on windows and doors must open from inside without a key in case of fire.
Lead-Safe Work in Pre-1978 Homes (EPA RRP Rule)
Under the EPA’s Renovation, Repair and Painting (RRP) Rule, anyone paid to do work that disturbs paint in housing built before 1978 must be certified, with workers trained in lead-safe work practices. EPA says window replacement is always covered regardless of square footage, and firms can’t advertise or perform covered work without firm certification. It generally doesn’t cover homeowners doing their own work, unless they rent out part of the house, run a childcare center there or flip houses. Pennsylvania and New Jersey aren’t EPA-authorized to run their own programs, so EPA administers the rule here. Ask any installer for their lead-safe firm certification.
PA HIC Registration and the Philadelphia Contractor License
PA HIC registration. Pennsylvania’s Home Improvement Consumer Protection Act (Act 132 of 2008) requires contractors doing at least $5,000 of home improvement work a year to register with the Attorney General. Doors and windows are named in the law, and the registration number must appear in ads, contracts and estimates. The Attorney General notes that registration does not imply endorsement; it isn’t a quality rating. Check a registration at 1-888-520-6680. Contracts over $500 must be written and signed, with the work description, approximate start and completion dates, total price and notice of your right to cancel.
Philadelphia Contractor License. The City requires a Contractor License for construction, demolition or repair businesses, with OSHA 30-trained supervisors, insurance and tax compliance. A business that only works on existing one- or two-family dwellings, without electrical, plumbing or fire suppression work, doesn’t need it; it submits its PA HIC registration to L&I instead, with a Commercial Activity License and insurance.
Outside the City: Bucks and Montgomery Counties
Each suburban township runs its own code office. Horsham Township in Montgomery County doesn’t require a permit to replace windows and doors where no changes to the opening are made, requires one where they are, and warns that fines can be issued for work begun before a required permit. Newtown Township in Bucks County requires a permit only if the new window isn’t the same size and needs structural changes. Townships in Delaware and Chester counties and New Jersey towns set their own rules too, so call before work starts.
Replacing windows or doors in Philadelphia? We install Andersen, ProVia and Marvin products across the city and suburbs. See our window replacement in Philadelphia and door replacement in Philadelphia pages, compare fiberglass vs steel entry doors, or request a free in-home estimate.
Frequently Asked Questions
Do I need a permit to replace windows in Philadelphia?
Usually not for a one- or two-family home, if the openings keep their location, shape and size, there’s no structural change and the property isn’t historic. Changed or new openings need a permit.
Do I need a permit to replace a front door in Philadelphia?
The same rule applies. A same-size entry door or storm door replacement on a non-historic one- or two-family home generally doesn’t need one. On a historic property, doors, storm doors and security doors require Historical Commission review.
What is an EZ permit in Philadelphia?
An L&I permit issued without plans for work meeting a published standard. Same-size window and door replacement qualifies where a permit is needed, mainly on larger buildings.
Can a homeowner pull a window permit in Philadelphia?
Yes. Any owner can apply, and on an existing one- or two-family home an owner who lives there may also do the work.
Does the EPA lead rule apply to window replacement?
Yes, in pre-1978 homes when the work is paid. EPA says window replacement is always covered, so the contractor must be a certified firm using lead-safe practices.
How do I find out if my Philadelphia house is historic?
Search the Philadelphia Register of Historic Places, the Historical Commission’s map or its list of historic districts by your OPA address, or email preservation@phila.gov.
Window & Door Replacement in Philadelphia, PA & NJ
ProView Construction has 10+ years of experience and 110+ five-star Google reviews, installing Andersen, Marvin and ProVia windows and Andersen and ProVia doors in Philadelphia, Bucks, Montgomery, Delaware and Chester County, and New Jersey. Financing with no money down is available. Request a free quote or call 215-259-8886.
