Skip to content Skip to footer

Window Replacement Cost in Philadelphia (2026)

Published 2026 cost guides put replacement windows at roughly $300 to $2,500 per window, with a national average project of $7,347, according to Angi (2026 data). Better-specified windows cost more here: the 2025 Cost vs Value report priced a 10-window upscale vinyl replacement in Philadelphia at $22,508, about $2,250 per opening. Where your home lands depends on material, the condition of each opening and how the job is installed, and only a written quote after measuring gives you a real number.

This guide covers the full range of materials and brands we install and what moves the price in Philadelphia specifically: rowhome masonry openings, upper-floor access, lead-safe work, historic review, glass packages and 2026 incentives. For series-by-series brand detail, see our Andersen windows cost guide and our ProVia windows cost guide.

Published Window Replacement Costs for 2026

The common sources measure different things, so it helps to see them side by side. National surveys average thousands of projects, many of them basic. The Cost vs Value report prices one defined, upscale job in each city.

Source (data year) What it measures Reported cost
Angi (2026, updated Oct. 2026) National average across 17,857 projects $7,347 per project; most pay $3,436–$11,836; $300–$2,500 per window
Angi (2026) 8 to 12 windows $6,000–$9,000
This Old House (2026 survey of 1,000 homeowners) National average $517 per installed window; $7,183 per project
Cost vs Value 2025, Philadelphia 10 upscale vinyl double-hung windows, 3×5 ft $22,508
Cost vs Value 2025, Philadelphia 10 upscale wood windows, aluminum-clad exterior $26,630
Cost vs Value 2025, Middle Atlantic region Same vinyl and wood projects $23,986 vinyl; $29,423 wood

Why the Philadelphia figure is higher than the national averages

The Cost vs Value projects are not budget windows. The vinyl job specifies insulated low-E glass, simulated divided lites and a custom exterior color, with exterior trim built to match. The wood job adds stained hardwood interiors and custom-color aluminum cladding. Both are priced as full-service remodeling jobs, and a 10-window project carries setup costs that a 20-window project spreads thinner. The national averages, by contrast, include many basic white vinyl inserts. Both kinds of number are real; they describe different jobs. The same report estimated that the Philadelphia vinyl project recouped 83.1% of its cost at resale and the wood project 64.3%.

Cost by Window Material

Frame material sets the baseline. Angi lists the per-window ranges below by frame material, with installation labor listed separately at $100 to $300 per window. This Old House’s survey averages are shown for comparison.

Material Angi range per window (2026) This Old House average (2026) Lines we install
Vinyl $100–$900 $472 ProVia Aspect, ProVia Endure
Composite (including Fibrex) $300–$1,200 Not reported Andersen 100 Series
Fiberglass $500–$1,500 $564 Marvin Essential, Marvin Elevate
Wood and wood-clad $150–$1,300 (wood) $544 (wood) Andersen 200, 400, A-Series and E-Series; ProVia Aeris; Marvin Signature

Vinyl is the most common choice for Philadelphia rowhome inserts and the lowest cost per opening. Quality varies widely inside the category: a multi-chamber premium frame and a value frame can look alike on a showroom wall and perform differently in January. Our ProVia windows page covers the Aspect and Endure lines.

Composite and fiberglass frames are stiffer than vinyl, allow narrower frames for more glass, and handle dark exterior colors well. Andersen’s 100 Series is built from Fibrex composite; Marvin’s Essential and Elevate use Ultrex fiberglass. See our Andersen windows and Marvin windows pages, and our Marvin Signature, Elevate and Essential comparison.

Wood and wood-clad windows are usually the top tier within each brand’s lineup, even though national averages put them close to fiberglass. You get a real wood interior with a low-maintenance clad exterior, and on historic facades they are often the option that fits the review. Our Andersen window series comparison shows how the 200, 400, A-Series and E-Series differ.

Window Style and Size

Style changes the price per opening. Angi’s 2026 figures put double-hung windows at $150–$650, casements at $150–$1,000, picture windows at $65–$700, bay windows at $900–$7,100 and bow windows at $1,500–$6,500. Most Philadelphia rowhomes are double-hung front and back, with the occasional bay, transom or basement hopper.

Size matters less than people expect for standard openings, because most replacement lines are made to order from your measurements anyway. It matters a lot for the tall front windows common on older rowhomes and twins: larger glass, heavier sashes and a bigger unit to carry up the stairs or lift from the sidewalk.

Insert vs Full-Frame Installation

Installation method can move the total more than the product line does. Angi’s 2026 figures put retrofit (insert) replacement at $100–$300 per window and full-frame replacement at $180–$1,500 per window. An insert sets the new window inside the existing frame; full-frame removes everything down to the rough opening. Our brand cost guides explain when each is the right call. In Philadelphia brick, full-frame work means taking the old frame back to the masonry, which is where hidden problems such as rotted wood subframes or a sagging lintel tend to surface.

What Makes Rowhome Window Replacement Different

  • Masonry openings. Most rowhome windows sit in brick, often with an old wood subframe behind the brick mold. The new window has to be shimmed, insulated and sealed to masonry, not nailed to a wood stud wall.
  • Brick mold and aluminum capping. On an insert job, the remaining exterior wood is usually wrapped with custom-bent aluminum coil so it never needs paint again. Capping is hand work at every opening and belongs on the quote as its own line.
  • Out-of-square openings. Century-old walls settle. Openings that are out of square or have deteriorated sills need extra carpentry before any window goes in.
  • Upper-floor access. Second- and third-floor fronts over a sidewalk, and rear windows over narrow yards and alleys, take longer to stage. Angi notes labor can reach $600 or more per window for upper-story access or tight spaces.
  • Parking and disposal. On blocks with tight parking, staging a truck and hauling old units away takes planning. Ask whether disposal and any street-use permits are included.
  • Permits. The City of Philadelphia lists replacing doors and windows in one- or two-family dwellings among projects that may not need a building permit. Changing the size of an opening, larger buildings and historic properties are different, so confirm with your installer. Our Philadelphia window and door permit guide covers the details.

Lead-Safe Work on Pre-1978 Homes

A large share of Philadelphia’s housing was built before 1978, and old window frames and sills are among the most likely places to find lead paint. Under the EPA’s Renovation, Repair and Painting (RRP) program, anyone paid to do work that disturbs paint in pre-1978 housing must be certified in lead-safe work practices. In practice that means plastic containment, careful removal, HEPA cleanup and a cleaning check, which adds labor and materials. A quote that is far below the others on an older house may simply leave this out.

Historic District Requirements

If your property is on the Philadelphia Register of Historic Places, you need approval from the Philadelphia Historical Commission before changing it. The review looks at material, profile and grille pattern on visible facades, and it can rule out the least expensive options on the front of the house. Build the review into your timeline, and talk to Commission staff early if you are unsure whether your block is designated.

Glass and Energy Options

Low-E coatings and gas fill are standard on most quality replacement lines; the upgrades are in the coating type and the number of panes. Triple-pane packages averaged $609 per window in This Old House’s 2026 survey, against $517 for all windows. Triple pane earns its cost on exposed walls and busy streets where it also cuts noise; it does far less on a shaded, quiet rear wall. Whatever you choose, ask for ENERGY STAR certification for our climate zone and compare U-factor and solar heat gain on each unit’s NFRC label.

Tax Credits and Rebates in 2026

The federal Energy Efficient Home Improvement Credit (section 25C) used to cover part of the cost of qualifying energy-efficient windows. It has ended. Under the 2025 budget law (Public Law 119-21), the IRS states that the credit is not allowed for any property placed in service after December 31, 2025. Windows installed in 2026 do not qualify.

On the utility side, PECO’s residential rebates focus on ENERGY STAR appliances, heating and cooling equipment and smart thermostats. We have not found a PECO rebate for replacement windows, so check the current list before you budget around one.

Financing and Ways to Lower the Total

  • Replace the whole house at once. Setup, staging and disposal are largely fixed, so the cost per window drops as the count rises.
  • Match the method to each opening. Full-frame where a frame is rotted, insert where it is sound. One house can have both.
  • Put premium lines where they show. A higher series on the street facade and a value line on the rear is a common, sensible split.
  • Use financing instead of phasing. We offer financing with no money down, which lets the job be done in one phase. Terms are confirmed with your quote.

Want a real number for your windows? We measure every opening, check frames and sills, and write a quote that names the product line, installation method and trim scope for each window. See our window replacement in Philadelphia page, then request a free in-home estimate or call 215-259-8886.

Frequently Asked Questions

How much does it cost to replace windows in a Philadelphia rowhome?

There is no single figure, because rowhomes vary in window count, size, access and frame condition. For reference, Angi reports $6,000 to $9,000 nationally for 8 to 12 windows in 2026, while the 2025 Cost vs Value report priced 10 upscale vinyl windows in Philadelphia at $22,508. A measured, written quote is the only reliable number for your house.

Is the federal tax credit for replacement windows still available in 2026?

No. The IRS states that the Energy Efficient Home Improvement Credit (25C) is not allowed for property placed in service after December 31, 2025, so windows installed in 2026 do not qualify.

Do I need a permit to replace windows in Philadelphia?

The City lists replacing doors and windows in one- or two-family dwellings among projects that may not need a building permit. Changing the size of an opening, larger buildings and properties on the historic register follow different rules, so confirm before work starts.

Is insert or full-frame replacement cheaper?

Insert replacement is cheaper and faster when the existing frame is square, solid and dry. Full-frame costs more but is the right choice when frames or sills are rotted or the opening is badly out of square.

Can I install vinyl windows on a historic Philadelphia home?

It depends on the property and the facade. Work on buildings listed on the Philadelphia Register of Historic Places needs Historical Commission approval, and the review of material and profile on visible elevations can rule out some lower-cost options. Ask Commission staff early in planning.

Can I finance window replacement?

Yes. ProView offers financing with no money down, and the terms are confirmed with your written quote.

Window Replacement in Philadelphia, PA & NJ

ProView Construction has more than 10 years of experience replacing windows across Philadelphia, Bucks, Montgomery, Delaware and Chester County, PA, and New Jersey, with 110+ five-star Google reviews. We are an Andersen Certified Contractor and a Marvin Authorized Replacement Contractor, and we install ProVia windows as well. Call 215-259-8886 to schedule a free in-home estimate.